Mobile Home Relevelling in Edmonton, Alberta

Restore stability and comfort to your home. Trusted by mobile homeowners across Edmonton.

Mobile Home Releveling in Edmonton

mobile home parks in Edmonton
  • 10+ years of service for Edmonton, Sherwood Park, Spruce Grove and Stony Plain
  • Quick scheduling for foundation inspections
  • Fixed quotes — no surprises
  • Backed by warranty
  • Relevelling’s done in all Edmonton area parks
    • Westview Village
    • Castle View Village
    • Maple Oak Ridge
    • Evergreen Community
    • Jubilee Landing
    • Parkland Village
    • Mobile City Estates
    • Meridian Meadows

How Mobile Home Relevelling in Edmonton Works

  1. Start by getting a free estimate and discovery call
  2. Get an On-site inspection & diagnosis
  3. Precision levelling using top-grade equipment and processes

We offer a few jacking processes depending on the complexity and scope of the relevel project.

🧰 Tools and Equipment for Mobile Home Relevelling in Edmonton

Relevelling mobile homes in Edmonton can range from quick adjustments to full-structure lifts, depending on the severity of settling and the type of home.

🔧 Simple Shim-Level Adjustments

For minor relevelling projects—such as when only one corner of a home has settled—we use 20-ton bottle jacks to carefully adjust the frame and insert precision shims. This approach is ideal for:

  • Single-wide mobile homes
  • Localized settling issues
  • Homes with minor dips or shifts

These targeted adjustments allow for fast, efficient corrections without major structural disruption.

🏗️ Full-Frame Lifts for Double-Wides & Additions

Double-wide mobile homes or units with additions, sunrooms, or attached decks require a more strategic approach. We develop a custom lift plan that ensures the entire structure stays aligned during the process.

Our team uses multiple synchronized jack points and support cribbing to:

  • Maintain the integrity of the marriage line
  • Avoid damage to plumbing, electrical, or ductwork
  • Prevent shearing at the attachment points of add-ons

🚚 Heavy-Duty Equipment for Complex Moves

When a home needs a major lift or repositioning—such as in a jack-and-slide project or full foundation reset—we bring in:

  • Beams for load distribution
  • High-capacity hydraulic jacks
  • Specialized support equipment for safe, even lifts

No matter the scope, our equipment is selected to ensure a smooth, controlled relevelling process that protects both the home and the people living in it.


2024 Levelling Project in Maple Ridge, Edmonton.

🏗️ Case Study: Full Mobile Home Levelling in Maple Ridge (Edmonton)

In June 2024, our team was called to level a 1970s double-wide mobile home in Maple Ridge, one of Edmonton’s largest mobile home communities. The homeowner had been struggling with major structural issues caused by years of foundation movement and moisture damage.

🚨 The Problem: Poor Soil Support & Moisture Saturation

When the home was originally placed decades ago, its foundation wasn’t properly designed for the clay-heavy soil beneath it. Over time, the weight of the home exceeded the ground’s bearing capacity, causing it to slowly sink. Making matters worse, the home had plywood skirting with poor ventilation, which trapped moisture and contributed to:

  • Softening of the ground underneath
  • Accelerated rot in the wood blocking
  • Ongoing settling, especially during freeze-thaw cycles

To add to the issue, the eavestrough system had failed, leaking water directly along the side of the home. Without downspout extensions, water pooled at the corners and saturated the soil—exacerbating the sinking.

By the time we arrived, the home had settled over 8 inches across its footprint, with one corner sagging even lower, leaving the unit over 4 inches out of level.


🛠️ Our Solution: Full Lift & New Foundation Points

Over the course of one week, our crew of 2–5 technicians:

  • Strategically dug access points around the home to safely position jacks
  • Performed a precision lift, carefully re-raising the home to its original install height
  • Removed all old, rotted blocking
  • Installed 28 new load-bearing points with solid concrete pads and cribbing

The home was returned to a level position, and while the elevation wasn’t excessively high, it was now secure, stable, and built to last.


✅ The Results: A Noticeable Difference Inside & Out

After the relevelling:

  • Doors, cabinets, and connections lined up properly
  • A previously visible “step” between the two units became flush
  • The homeowner immediately noticed the difference in stability and comfort inside the home

We temporarily removed the skirting to allow the ground and crawlspace to dry, leaving it off for the homeowner to reinstall after additional gutter repairs.


2022 Levelling Project in Westview Village, Edmonton.

🏗️ Case Study: Mobile Home Relevelling in Westview Village, Edmonton

In October 2022, our team completed a full relevelling and vinyl skirting adjustment for a 1990s single-wide mobile home (16×76) located in Westview Village, one of Edmonton’s largest and most established mobile home communities.

🚨 The Problem: Long-Term Settling & Plumbing Issues

The back of the home had sunk approximately 8 inches, creating a noticeable slope across the unit. We identified a combination of factors contributing to the issue:

  • Initial settling from when the park was originally developed
  • A naturally low-lying area with a high water table
  • Gradual ground settling under the entire home, rather than just block failure

When the home shifts this significantly, it doesn’t just affect comfort — it can cause critical infrastructure problems as well.

During inspection, we discovered a cracked 3″ ABS sewer drain in the crawlspace. The extreme slope of the home had reversed the grade of the drain pipe, making it harder for waste to flow properly. The pipe had filled with standing water, which froze over winter, causing a fracture in the elbow joint. Luckily, the homeowner hadn’t been using that bathroom regularly, so water damage was minimal.


🛠️ Our Solution: Lift, Relevel, and Skirting Realignment

After an initial call, we visited the site to assess the home, provide a quote, and explain the scope of work. On the scheduled service day, one technician completed the project over two days, including:

  • Lifting the back of the home to match the front elevation
  • Relevelling the full structure for proper grade and support
  • Identifying and explaining the plumbing issue
  • Restoring proper grade to the sewer line by lifting the home
  • Refreshing the vinyl skirting, cutting and installing new panels where the originals no longer fit
  • Reinforcing the bottom board in certain areas to ensure the skirting remained straight and plumb with the newly levelled home

✅ The Results: Level Floors, Happy Homeowner

After the lift:

  • The homeowner immediately felt the difference, especially in the back of the home where the drop had been most severe
  • The plumbing issue was resolved by restoring proper pitch to the drain lines — preventing future freeze-ups or leaks
  • The refreshed skirting gave the exterior a cleaner look and ensured proper enclosure going forward

This project is a great example of how mobile home relevelling in Edmonton can impact not just structural integrity, but also functionality and long-term plumbing health.

Frequently Asked Questions

How much does mobile home relevelling cost in Edmonton?

Relevelling a mobile home in Edmonton typically ranges from $500 to $3,000, depending on the size of the home, the condition of the crawlspace, the amount of settling, and ground conditions. We offer free instant estimates so you can get an accurate price for your property.

How can I tell if my mobile home needs to be releveled?

Common signs your home may be out of level include sticking doors, sloped floors, gaps between walls and ceilings, and cracks in drywall. You may also notice cabinet doors not closing or a visible “step” between units in double-wides.

Can I just get relevel or do I need a new foundation?

If the support blocking are in good condition we can adjust and shim the existing loading points.

What causes mobile homes to become unlevel in Edmonton?

The most common causes include poor soil bearing capacity, frost heave, water pooling from broken gutters, and rotted wood blocking. Edmonton’s freeze-thaw cycles and clay soils make regular inspections important.

How long does the relevelling process take?

Most shim-level projects are completed in 4-8 hours, but more complex jobs with significant settling or tight access can take up to 1 to 3 days. We’ll always give you a time estimate upfront.

Do I need to be home during the relevelling?

It’s not required, but we do need access to the house to check doors and run water to check the plumbing for leaks.
We prefer you at least be able to meet up with us at the end of the project to inspect and get debriefed on the project.

Is there a warranty on your relevelling work?

Yes — all of our relevelling projects include a limited warranty and optional follow-up adjustments, especially after large lifts or moisture-affected areas.
Warranty coverages change based on site condition and which solution is chosen, discuss with your Service Advisor as it is provided on a case-by-case basis.

Get an Instant Estimate Now

Fill out this form with details about your project and get a detailed price estimate and recommended scope of work emailed to you